If you want to learn how to Fold the Farthest Flying Paper Aircraft, you should first know that the farthest Flying Paper airplane is 69.14 meters.It has a better name, Sky King. In 2012, former Cal Berkeley quarterback Joe Ayoob officially broke the Guinness World Record by flying a John Collins designed paper airplane 69.14 meters (226 feet, 10 inches) — that’s 5.95 meters or 19 feet, 6 inches farther than the previous record.
You will need to pay attention to many details to complete it perfectly. Let’s get started.
In the folding of farthest flying paper airplane, You should pay attention to the following details！
First, thrust. Not difficult to solve, is a sentence: make miracles. So you will find that John Collins invited Joe Ayoob, a famous rugby player, to help paper airplane get an initial velocity of explosion by using his high density muscles and powerful instantaneous explosive power.
Second, give the paper plane a positive dihedral angle, that is, if the angle between the wing and the fuselage is obtuse.
Thirdly, the edges of the creases are neat and clean to ensure clarity, and the creases can be smoothed as flat as possible with a knife handle or professional tools.
Fourth, small wings are left at the tip of the wing to reduce air drag.
Fifth, the wing part adjusts some radians in order to allow the airflow to flow rapidly, forming a pressure difference and flying farther.
Sixth, and most importantly, the whole process needs to fold symmetrically to ensure smooth flight, which is undoubtedly a difficult challenge many people will face.
Step 1:Start with a regular piece of rectangle paper that’s 8.5 x 11.0 inches (215.9 x 279.4 mm) or A4 paper.Make a crease by folding the upper edge to the bottom edge,then unfold.
Step 2:Make a crease by folding the left edge to the right edge,then unfold.
Step 3:Fold the left-bottom corner to the center point.
Step 4:Fold the left-upper corner to the center point.
Step 5:Fold the left edges coincides with centerline.
Step 6:Fold the triangle on the left side of the module behind along the dotted line as shown in the figure.
Step 7:Fold the left edges coincides with the right edges of the upper layer.Then turn over.
Step 8:Fold the triangle of the upper layer to the left along the dotted line.
Step 9: Fold the corners to center along the dotted line.
Step 10:Fold in half.
Step 11:Make the airplane wings. Fold the left edge coincides with the top edge，then flatten.
Step 12:The rear of the plane should raise at 165 degrees, the tip of the plane should be 155 degrees, and the nose should be 165 degrees.